Pressure gauge scheme specification parameters

Pressure gauge scheme specification parameters

• highly integrated design, LCD / LED digital tube digital display;

• intelligent pneumatic induction startup is adopted to improve reliability and service life;

• intelligent automatic control and safety protection function;

• fault alarm and automatic power-off protection;

• arbitrary switching of three pressure units: psi, bar and kPa;

• high measurement and control accuracy, less affected by ambient temperature.

Performance parameters

• measuring pressure range: 0 ~ 12bar (or 0 ~ 175psi);

• measurement error: ≤± 10KPA (or 1.5psi);

• working (compensation) temperature: - 20 ~ 70 ℃;

• display resolution: 0.5psi;

• working voltage: 220VAC / 50Hz (110VAC / 60Hz can also be customized);

• control accuracy: ± 10KPA (or 1.5psi).

Concise use

• when powered on, the LCD screen displays the pressure of the air storage tank, and the air compressor motor enters the automatic control state;

• press the "unit" key to realize the free switching of PSI, bar and kPa;

• when the air compressor pressure fails to reach the set lower limit pressure value, the motor starts and the compressed gas enters the air storage tank; When the pressure of the air compressor exceeds the upper limit setting value, power off and close; When the air tank pressure drops below the lower limit set pressure value, it enters a new round of control state.